Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This video provides instructions for removing and replacing the original exhaust with an Akrapovic on a Piaggio Beverly 350 scooter. First, place the scooter on the centre stand and remove the exhaust protection panel by unscrewing the screws. Once removed, take off the silencer by unscrewing the fixing bracket and the collector, as shown in the video. Now, install the new exhaust end can, securing it properly by tightening the clamp screw (as well as the brackets)!

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Piaggio Beverly 350?
How do you replace the exhaust pipe of the Piaggio Beverly 350?
Beverly 350 The procedure for replacing the exhaust pipe of the Piaggio Beverly 350 is carried out by loosening the screw located at the bottom and at the top, i…
How to Replace the Variator of the Piaggio Beverly 350
How to Replace the Variator of the Piaggio Beverly 350
Beverly 350 In this video, you will see the main instructions for removing and replacing the variator of the Piaggio Beverly 350 scooter. First, place the centra…
How to Replace the Front Headlight Bulb on a Piaggio Beverly 350
How to Replace the Front Headlight Bulb on a Piaggio Beverly 350
Beverly 350 The main instructions in this guide will show you how to disassemble and replace the dipped beam bulb of the front headlight on the Piaggio Beverly 3…

How to Replace the Air Filter in the KTM Adventure 990

In this tutorial, see how to replace the air filter in the KTM Adventure 990, a very simple and quick operation. First, insert the key into the left ignition switch, then turn it and detach the seat from the base. Next, remove the plastic cover from the tank, locate the filter box, and open it by unscrewing the four fastening screws. At this point, remove the old filter, clean the inside of the housing from any dirt residue, and insert the new part. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos