Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The procedure for replacing the exhaust pipe of the Piaggio Beverly 350 is carried out by loosening the screw located at the bottom and at the top, in order to detach the plastic protective cover. Once this panel has been removed, all the screws securing the exhaust to its housing can be unscrewed and also loosen the one corresponding to the ring that connects it to the collector; after the ring has been widened, it will be possible to completely remove the exhaust from its seat, in order to insert the new replacement piece by installing it correctly.

Posted on 17 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Belt on the Piaggio Beverly 350?
How to Replace the Belt on the Piaggio Beverly 350?
Beverly 350 To replace the transmission belt on the Piaggio Beverly 350, loosen the screws securing the cover over the rear wheel, located under the one containi…
How to Replace the Variator of the Piaggio Beverly 350
How to Replace the Variator of the Piaggio Beverly 350
Beverly 350 In this video, you will see the main instructions for removing and replacing the variator of the Piaggio Beverly 350 scooter. First, place the centra…
Replacing the drive belt on the Piaggio Beverly 350
Replacing the drive belt on the Piaggio Beverly 350
Beverly 350 This guide provides instructions for removing and replacing the drive belt on the Piaggio Beverly 350 scooter in simple steps. First, place the scoot…

How to Replace the Air Filter in the KTM Adventure 990

In this tutorial, see how to replace the air filter in the KTM Adventure 990, a very simple and quick operation. First, insert the key into the left ignition switch, then turn it and detach the seat from the base. Next, remove the plastic cover from the tank, locate the filter box, and open it by unscrewing the four fastening screws. At this point, remove the old filter, clean the inside of the housing from any dirt residue, and insert the new part. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos