Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Variator of the Piaggio Beverly 350

Model: Piaggio Beverly 350
Part:

Video tutorial

In this video, you will see the main instructions for removing and replacing the variator of the Piaggio Beverly 350 scooter. First, place the central stand and start by removing the plastic cover of the transmission; then unscrew all the side screws of the transmission cover, as shown in the video.

Next, remove the nuts of the bell and the fan; take off the belt and subsequently the variator, along with the rollers contained inside. Finally, replace the variator and reassemble everything by applying the reverse procedure of disassembly!


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Replace the Belt on the Piaggio Beverly 350?
How to Replace the Belt on the Piaggio Beverly 350?
Beverly 350 To replace the transmission belt on the Piaggio Beverly 350, loosen the screws securing the cover over the rear wheel, located under the one containi…
Removing the Belt and Variator from a Piaggio Beverly 350
Removing the Belt and Variator from a Piaggio Beverly 350
Beverly 350 Let's see how to remove the drive belt and variator from a Piaggio Beverly 350 scooter in simple steps. First, remove the plastic cover from the left…
How to Replace the Belt on the Piaggio Beverly 350?
How to Replace the Belt on the Piaggio Beverly 350?
Beverly 350 To replace the belt on the Piaggio Beverly 350, first loosen the bolts securing the protective cover of the casing located near the rear wheel. Once …

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos