Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Belt and Variator from a Piaggio Beverly 350

Model: Piaggio Beverly 350
Part:

Video tutorial

Let's see how to remove the drive belt and variator from a Piaggio Beverly 350 scooter in simple steps. First, remove the plastic cover from the left casing; then, using a socket wrench, unscrew the fastening screws found inside and the side fastening screws.

At this point, remove the plastic cover and, with a 15 mm socket, take out the central bolt; remove the air filter box by unscrewing the screws, and unscrew the pins from the transmission casing. Finally, remove the fan, followed by the belt and variator, as shown in the video!


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Replace the Belt on the Piaggio Beverly 350?
How to Replace the Belt on the Piaggio Beverly 350?
Beverly 350 To replace the transmission belt on the Piaggio Beverly 350, loosen the screws securing the cover over the rear wheel, located under the one containi…
How to Replace the Variator of the Piaggio Beverly 350
How to Replace the Variator of the Piaggio Beverly 350
Beverly 350 In this video, you will see the main instructions for removing and replacing the variator of the Piaggio Beverly 350 scooter. First, place the centra…
How to Replace the Belt on the Piaggio Beverly 350?
How to Replace the Belt on the Piaggio Beverly 350?
Beverly 350 To replace the belt on the Piaggio Beverly 350, first loosen the bolts securing the protective cover of the casing located near the rear wheel. Once …

How to Change the Engine Oil in the KTM Duke 390?

In this tutorial, you can see how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure the engine is cool enough, then remove the lower protective cover and place a container underneath the bike. Next, locate the drain bolt, unscrew it with an 18mm socket spanner, and let all the oil in the system drain out. At this point, you can open the filter housing, remove the old filter, and insert the replacement. Finally, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos