Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Front Brake Pads on Piaggio Mp3

Model: Piaggio Mp3
Part: Brake pads

Video tutorial

Undo the bolts of the affected front wheel, lift the scooter slightly with a jack, and remove the wheel. This will allow you to access the two rear bolts, which are directed towards the scooter's axle, that secure the caliper to the brake disc.

Undo these bolts and remove the caliper from the disc. Using a small flat screwdriver, remove the retaining clip of the central pin of the pads, as shown in the video.

Extract the pin and then the worn pads. Insert the new pads (if they do not fit, widen the slots with a crowbar or flat screwdriver) and proceed in reverse order.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Mp3 To replace the handbrake cable of the Piaggio MP3, you will need to loosen the lower end, which is located near the brake caliper on the front wheel.…
Mp3 In this video tutorial, learn how to replace the front wheel bearing on the Piaggio MP3 scooter. First, place the central stand on your scooter and b…
Mp3 In this brief and simple guide, learn how to replace the front headlamp bulbs on the Piaggio MP3 scooter. First, place your scooter on the centre sta…

How to Set the Time on the Suzuki V-Strom 650?

In this tutorial, learn how to set the time on the Suzuki V-Strom 650, a simple and quick operation, for instance, after replacing the battery or switching to daylight saving time. First, insert the key, then turn on the instrument cluster and press both the "MODE" button upwards and the button to the left of the speedometer. Wait for the time to start flashing, release both buttons, and adjust the clock using the button on the dashboard. To save the setting, wait a few seconds.

Watch the video!


by ScegliAuto

More videos