Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. :
  3. Vespa 125 Lx
    4. : How to do the service on the Piaggio Vespa 50 - 125 LX

Model: Piaggio Vespa 125 Lx
Part: Engine oil
How to do the service on the Piaggio Vespa 50 - 125 LX

Let's find out in this guide how to carry out the regular maintenance service of the oil change on the Piaggio Vespa 50 and 125 LX, in simple steps. First of all we position the central stand on our scooter and start by unscrewing the oil vent bolt that we find under the engine, using a socket wrench; then let the oil drain in a container for about ten minutes. At this point we unscrew the oil filter bolt, removing and replacing it with the new one; then let's go and pour the new engine oil with the right gradation!


Posted on 2 March 2024 by ScegliAuto



How do you replace the exhaust pipe of the Piaggio Vespa LX 125?
Vespa 125 Lx The procedure for replacing the muffler on the Piaggio Vespa LX 125 is done by loosening the screws that secure the exhaust terminal to its housing:
Where are the fuses located in the Piaggio Vespa LX 125?
Vespa 125 Lx The fuses of the Piaggio Vespa LX 125 are located at the rear of the motorcycle: in order to reach them, you will need to open the underseat compartm
How to replace the headlight bulb in the Piaggio Vespa 125 LX scooter?
Vespa 125 Lx .. replace the headlight bulb on the Piaggio Vespa 125 LX scooter, an extremely simple and fast operation. First of all, make sure that the key is not..

How do you replace the Benelli TnT 899 spark plugs?

To be able to replace the spark plugs of the Benelli TnT 899 you have to unscrew the screws that fix the saddle of the bike and consequently also those that fix the fuel tank to the front of the bike. This can then now be removed to loosen the screws securing the air cleaner box underneath, which will then be removed as well. Now you will have to disconnect the cables connected to the coils, remove the latter from their seat and remove the spark plugs with the appropriate socket wrench. Then you can fit the new spark plugs, position the coils and the filter box, also fitting all the other parts that have been removed.

Watch the video!


by ScegliAuto

More videos