|
Do it yourself
| |||
| ||||
|
Model: Piaggio Mp3 400
In this video tutorial, you will learn how to disassemble and replace the drive belt on the Piaggio MP3 400 scooter. First, place the scooter on its stand and start by removing the transmission cover, also taking off the air filter cover. Next, undo the nut on the fan and the nut on the clutch bell to remove it, as shown in the video. At this point, remove the drive belt, accessing the variator if necessary; replace the belt and reassemble everything by following the reverse procedure!
Updated on 14 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Mp3 400
In this video we see what the problem of the Master 400 engine mounted on the Piaggio MP3 400 is, which is a common issue for many MP3 400s, namely t…
Mp3 400
In today’s tutorial video, you will see the instructions for removing and replacing the transmission belt and variator on the Piaggio MP3 400 scooter…
Mp3 400
In this video tutorial, you will see the instructions on how to install the belt and all the main components of the transmission of the Piaggio MP3 4…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.057
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
