Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil on a Piaggio Fly 150, unscrew the oil drain plug located at the lower central area of the scooter, near the exhaust. By unscrewing the plug, you can collect the used oil in a suitably positioned container. Above the drain plug, you will also find the oil filter, which should be removed from its housing and replaced with a new spare part. After the replacement, top up the oil by pouring it through the breather located above the exhaust.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter of the Piaggio Fly 150
How to Replace the Engine Oil and Oil Filter of the Piaggio Fly 150
Fly 150 Follow these instructions to perform the routine maintenance service by replacing the engine oil and oil filter of the Piaggio Fly 150 scooter. First…
How to Replace the Transmission on the Piaggio Fly 150?
How to Replace the Transmission on the Piaggio Fly 150?
Fly 150 To replace the transmission on the Piaggio Fly 150, you need to loosen the screws that secure the cover of the casing located near the rear wheel of …
How do you replace the starter motor of the Piaggio Fly 150?
How do you replace the starter motor of the Piaggio Fly 150?
Fly 150 To replace the starter motor of the Piaggio Fly 150, you need to open the underseat compartment so that you can access its internal part: the starter…

How to replace the engine oil in the KTM Super Duke R?

In this tutorial we can see how to replace the motor oil in the KTM Super Duke R, an extremely simple and fast operation. First of all, we wait for the engine to be cold enough, then we place a container under the bike, locate the plugs of the two drainage holes and unscrew them using a 13mm socket wrench. We then let all the oil in the system drain out, remove the secondary filter and clean it from any dirt residue. At this point, all that's left to do is to open the main filter housing, insert the replacement, reassemble everything and pour the new oil through the top hole.

Watch the video!


by ScegliAuto

More videos