Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Beverly 500
Part: Pump

This guide illustrates the procedure for repairing or replacing the water pump on the Piaggio Beverly 500. Follow these steps: 1. Remove the exhaust; 2. Remove the air filter; 3. Remove the oil sump, ensuring to drain all the oil inside beforehand, checking during disassembly for any gasket residues; 4. Remove the cover, again checking for any gasket residues and replacing them if necessary. If you need to replace the gaskets, have new replacements ready; it is also advisable to replace the seals for safety. Last but not least, if the shaft shows evident signs of wear, it is strongly recommended to replace this component as well.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Speedometer Cable on a Piaggio Beverly 500?
How to Replace the Speedometer Cable on a Piaggio Beverly 500?
Beverly 500 You can replace the speedometer cable on a Piaggio Beverly 500 by loosening the screws that secure the inner cover of the front shield of the scooter…
Replace the Engine Oil and Oil Filter of the Piaggio Beverly 500
Beverly 500 Today, discover how to perform the routine maintenance service by replacing the engine oil and oil filter of the Piaggio Beverly 500 scooter to ensur…
How do you replace the engine oil of the Piaggio Beverly 500?
How do you replace the engine oil of the Piaggio Beverly 500?
Beverly 500 It will be possible to replace the motor oil of the Piaggio Beverly 500 by loosening the drain plug located in the central lower part of the motorcyc…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos