Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rollers in the Variator of a Piaggio Beverly 250

Model: Piaggio Beverly 250
Part:

Video tutorial

In today's tutorial video, we will see the procedure necessary for disassembling and replacing the rollers in the variator of the Piaggio Beverly 250 scooter. First, place the scooter on the centre stand and start by unscrewing the screws of the transmission cover located on the left; unscrew the central nut of the clutch bell using a socket spanner, as shown in the video.

At this point, unscrew the nut of the fan to remove the belt and subsequently the variator; disassemble and replace the rollers found inside, then reassemble everything!


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Replace the Transmission on the Piaggio Beverly 250?
How to Replace the Transmission on the Piaggio Beverly 250?
Beverly 250 To replace the transmission on the Piaggio Beverly 250, you need to loosen the screws securing the air filter, located on the left rear side of the b…
How to Access the Underseat Compartment on Piaggio Beverly 250
How to Access the Underseat Compartment on Piaggio Beverly 250
Beverly 250 If you only need to access the underseat compartment of your Piaggio Beverly 250, simply insert the key into the side slot and turn it. The seat will…
How to Change the Engine Oil on a Piaggio Beverly
How to Change the Engine Oil on a Piaggio Beverly
Beverly 250 In this brief guide, see how to change the engine oil on your Piaggio Beverly 250. It is not a very complex operation; just take some care, and you c…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos