|
Do it yourself
| |||
| ||||
|
Model: Piaggio Vespa 50 Special
To replace the clutch cable on the Piaggio Vespa 50 Special, loosen the bolts securing it near the rear wheel on the right side of the scooter. Once the cable is freed in this area, unscrew the bolts holding the corresponding clutch lever so that it can be removed and the cable connected to it can be pulled out. After the cable is removed, insert the new replacement part, which must be connected to the clutch and the lever itself.
Updated on 19 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Vespa 50 Special
It will be possible to replace the gearbox oil of the Piaggio Vespa 50 Special by loosening the drain plug located in the central lower part of the t…
Vespa 50 Special
Today, discover the procedure to replace the gear oil in the Piaggio Vespa 50 Special, as well as in the Vespa 125 Primavera. First, place the centra…
Vespa 50 Special
This guide shows how to perform the maximum carburetion adjustment on the engine of the Piaggio Vespa 50 Special, as well as the Vespa 125 Primavera.…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |