|
Do it yourself
| |||
| ||||
Model: Piaggio Ciao
This brief and simple guide shows you how to remove and replace the ignition lock cylinder of the Piaggio Ciao, following the instructions below. First, place the central stand and start drilling into the centre of the lock cylinder; then use something thin to try to extract it, finishing with pliers to remove it from its housing, as shown in the video. At this point, replace and install the new ignition lock cylinder, also replacing its key, following the video tutorial to the end!
Updated on 20 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Ciao
Before starting, position your Piaggio Ciao on the centre stand. Begin by undoing and removing the bolts that secure the rear luggage rack to the Cia…
Ciao
To disassemble the engine of the Piaggio Ciao, you will need to loosen the screws that fix the component to its housing, located in the center of the…
Ciao
This guide briefly outlines the instructions for dismantling and cleaning the carburettor of the Piaggio Ciao, as well as the Si and Garelli. First, …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
