Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the Piaggio Vespa GTS 125 Scooter?

Model: Piaggio Vespa Gts 125
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in the Piaggio Vespa GTS 125 scooter, a very simple and quick operation. First, ensure the engine is sufficiently cool, then place a container underneath.

Locate the drain bolt near the exhaust pipe and, using a socket wrench, unscrew it. Next, remove the small filter, clean it of any dirt, and allow the oil in the system to drain out. At this point, simply unscrew the main filter, tighten the replacement along with the bolt, and add new oil through the designated hole.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on the Piaggio Vespa GTS 125
How to Change the Engine Oil and Oil Filter on the Piaggio Vespa GTS 125
Vespa Gts 125 In this brief and simple guide, we will go through the steps to perform routine maintenance by changing the engine oil and oil filter on the Piaggio …
How to Adjust the Rear Shock Absorber of the Piaggio Vespa GTS 125
How to Adjust the Rear Shock Absorber of the Piaggio Vespa GTS 125
Vespa Gts 125 Follow these instructions to adjust the stiffness of the rear suspension on the Piaggio Vespa GTS 125 scooter, as well as the Vespa GTS 300. First, p…
How to Change the Engine Oil in a Piaggio Vespa GTS 125
How to Change the Engine Oil in a Piaggio Vespa GTS 125
Vespa Gts 125 In this tutorial, we will see how to change the engine oil in a Piaggio Vespa GTS 125 scooter, an extremely simple and quick operation. First, ensure…

How to Replace the Front Headlight on a Husqvarna 701?

To replace the front headlight on a Husqvarna 701, first loosen the screws that secure the front fairing laterally. Once the screws are loosened, you can detach the fairing and subsequently disconnect all the connectors attached inside. Once the fairing is released, loosen the screws located inside to completely detach the old headlight from the fairing. At this point, insert the new headlight, connect it and secure it with screws, then reinstall the fairing in the corresponding housing.

Watch the video!


by ScegliAuto

More videos