Do it yourself
Frequently asked questions about cars and motorcycles

Model: Piaggio Fly
Part:

In this tutorial, you will see how to remove the fairing on the Piaggio Fly scooter, a very simple and quick operation. First, unscrew the two screws located in the lower front area, then continue by unscrewing the additional screws around the glove compartment. Next, remove the panel containing the Piaggio logo, take out the remaining fixing screws, and separate the entire front fairing. At this point, simply remove both the lower fairing and the two side panels, each by removing the respective fixing screws. To fit the new parts, just follow the reverse procedure.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Fly To replace the dashboard bulbs on a Piaggio Fly, you need to unscrew the screws that secure the front fairing of the scooter, so that it can be compl…
Fly In this tutorial, see how to replace the front headlamp bulb on a Piaggio Fly scooter. This is a straightforward task but requires removing the headl…
Fly To replace the indicator relay on the Piaggio Fly, loosen the screws securing the front fairing. This will need to be completely removed to access th…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos