Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. Ram 2500
    4. : Rear bumper

RAM 2500 - Rear bumper

Rear Bumper RAM 2500 (2019-2028 / dt, mk 5)

RAM 2500 (2009-2019 / MK 4, D2, DS, DJ)
How to Remove the Rear Bumper of the Ram 2500?
To replace the rear bumper of the Ram 2500, access the underside of the vehicle to remove the screws that secure the bumper from the inside. Once these screws …Read all…
Posted on 31 August 2026 by ScegliAuto
RAM 2500 (2019-2026 / DT, MK 5)
Removing the Rear Bumper of the Ram 2500 (2020)
In today's video, you will see step-by-step instructions to remove the rear bumper of the 2020 Ram 2500, fifth generation. First, lift the vehicle and start by …Read all…
Posted on 4 August 2026 by ScegliAuto

Rear Bumper RAM 2500 (2009-2019 / mk 4, d2, ds, dj)

RAM 2500 (2009-2019 / MK 4, D2, DS, DJ)
How to Remove the Rear Bumper of the Ram 2500?
To replace the rear bumper of the Ram 2500, access the underside of the vehicle to remove the screws that secure the bumper from the inside. Once these screws …Read all…
Posted on 31 August 2026 by ScegliAuto
RAM 2500 (2019-2026 / DT, MK 5)
Removing the Rear Bumper of the Ram 2500 (2020)
In today's video, you will see step-by-step instructions to remove the rear bumper of the 2020 Ram 2500, fifth generation. First, lift the vehicle and start by …Read all…
Posted on 4 August 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Car stereo (2) Battery (2) Body (2) Key (14) V-belt (1) Checks and maintenance (1) Bearing (1) Differential (1) Brake rotors (3) Rear bench seat (1) Headlight (1) Tail light (1) Air filter (5) Cabin air filter (6) Diesel fuel filter (7) Oil filter (1) Grille (2) Fuel injectors (1) Accessory kit (1) Light bulb (2) Side marker bulb (1) Headlight bulb (2) Tail light bulb (1) Antifreeze coolant (1) License plate light (1) (1) Engine (2) Transmission fluid (1) Engine oil (2) Clock (2) Door trim panel (2) Front bumper (1) Rear bumper (2) Brake pads (3) Shift knob (1) Fuel pump (1) Wheel (1) Fuse box (6) Warning light – error code (3) Service warning light (11) Manufacturer emblem (1) Center console tunnel (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos