Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. Ram 2500
    4. : Fuel pump

RAM 2500 - Fuel pump

RAM 2500 (2002-2009 / D1, DC, DR, DM, DH, MK 3)
How to replace the fuel pump of the Dodge RAM 2500.
Today's procedure will illustrate how to disassemble and replace the fuel pump of the Dodge RAM 2500, following the instructions below. First, we lift the …read all…
Posted on 26 November 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Car stereo (2) Battery (2) Bodywork (2) Key (10) V-belt (1) -board computer (9) Checks and maintenance (6) Bearing (1) Differential (1) Brake discs (3) Rear bench seat (1) Tail light (1) Air filter (5) Cabin air filter (6) Diesel filter (7) Oil filter (1) Grille (2) Accessory Kit (1) Light bulb (2) Side turn signal light bulb (1) Headlight bulb (2) Rear light bulb (2) Antifreeze liquid (1) License plate light (1) Third brake light (1) Engine (2) Gear oil (1) Engine oil (2) Door panel (2) Front bumper (1) Rear bumper (2) Brake pads (3) Gear Shift Knob (1) Fuel pump (1) Instrument cluster (2) Wheel (1) Fuse box (2) Manufacturer's coat of arms (1) Central tunnel (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos