Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light in the RAM 3500 pick-up?

Model: RAM 3500 MK 5, DT - Years 2019-2026
Part: Tail light

As we can see in this tutorial, disassembling the rear light in the RAM 3500 pickup is very simple. We can do this in case we need to replace a faulty bulb or the headlight itself. First, we open the door of the box, then we unscrew the two fixing screws using a Torx T25 wrench. Once this is done, we grab the headlight, pull it towards us and disengage it from the bodywork. Since the internal cables are very short, before replacing a possible faulty bulb, disconnect all the connectors.

Posted on 22 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the remote control battery of the RAM 3500 pick-up?
How to replace the remote control battery of the RAM 3500 pick-up?
RAM 3500 (2019-2026 / MK 5, DT) In this tutorial we can see how to replace the remote control battery of the RAM 3500 pick-up. For this quick and easy operation we will need a small…
How to remove the rear light assembly of the RAM 3500 [USA]
How to remove the rear light assembly of the RAM 3500 [USA]
RAM 3500 (2009-2019 / DJ, DS, MK 4) To proceed with the disassembly of the rear light unit of the RAM 3500 it is necessary to follow the following procedure: first of all unhook the sup…
How to reset the Ram 3500 oil warning light
How to reset the Ram 3500 oil warning light
RAM 3500 (2009-2019 / DJ, DS, MK 4) If you have just replaced the engine oil and its filter on your Ram 3500, but the warning light continues to turn on steadily, you must necessarily p…

Other guides you may be interested in

How to Change the Glow Plugs on a Hyundai Santa Fe

In this video, see how to remove and replace the glow plugs on your Hyundai Santa Fe. Pull the lever to open the engine compartment located at the bottom left of the dashboard, lift the bonnet, and secure it. Follow the video for the tools to use for disassembly. Remove the plastic engine cover and the air filter kit; you will see the engine head bare without plastics. Unscrew the coils using a socket wrench and disconnect the power cables. Once all the coils are removed, unscrew the glow plugs from the head and take them out. To remove the other coils and glow plugs, you need to uncover the metal protection from the head; unscrew these as well and prepare to install the new glow plugs. Be careful not to let any debris fall into the engine head while unscrewing the glow plugs. It is advisable to vacuum the glow plug wells before disassembly.

Watch the video!


by ScegliAuto

More videos