Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Toyota CH-R

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

Below are the instructions to reset the tyre pressure light on the Toyota CH-R; before resetting the TPMS sensors, ensure all four tyres are at the correct operating pressure. Then, get in the vehicle and turn on the instrument panel; using the steering wheel controls, navigate to the vehicle settings and then to the tyre pressure option, confirming and executing the reset of the TPMS sensors, as shown in the video.

At this point, check that the tyre pressure light has been reset!


Posted on 25 February 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on a Toyota CH-R
How to reset the tyre pressure warning light on a Toyota CH-R
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) The steps in this guide will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota CH-R. Before performing the reset, …
How do you reset the tire pressure warning light on the Toyota C-HR?
How do you reset the tire pressure warning light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) It will be possible to reset the tire pressure warning light of the Toyota C-HR by first checking that all tires are inflated to the correct pressure…
How to Reset the Tyre Pressure Warning Light on a Toyota C-HR?
How to Reset the Tyre Pressure Warning Light on a Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) On the Toyota C-HR, to reset the tyre pressure warning light, first inflate the tyres to the recommended pressure value: this value is indicated on t…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos