Do it yourself
| ||||
|
RAM 3500 - Video tutorial
Model: RAM 3500
MK 4, DS, DJ
- Years 2009-2019 Today in this video tutorial, we will see how to disassemble and replace the front headlight of the Dodge RAM 3500, as well as the 2500 and 1500 with a 5.7L HEMI engine. First, we open the engine hood of our car and start unscrewing the fastening screws of the front grille of the front bumper, in order to remove it. Then, we unscrew the fastening screws of the front headlight, which we find at the top and on the sides, as shown in the video. At this point, we disconnect the electrical connector of the bulbs, removing and replacing the optical group with the new one, following the video until the end!
Posted on 3 April 2023 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.039
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |