Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. 3500
    4. : How to replace the headlight on the Dodge Ram 3500?

RAM 3500 - Video tutorial

Model: RAM 3500 DM, DH, DR, MK 3, DC, D1 - Years 2003-2009
Part: Headlight
Operation: How to replace the headlight on the Dodge Ram 3500?

In order to replace the headlight of the Dodge Ram 3500 you have to go and remove the grille located in the front of the car, between the two headlights. To remove this grille, loosen the screws that secure the grille in the front part of the engine compartment; once this has been removed, the screws securing the headlight will be accessible. By unscrewing the latter as well, the old headlight can be removed from its housing and disconnected from the connectors. The new lighthouse must be connected to the latter, which must be installed and fixed with the appropriate screws.


Posted on 8 September 2022 by ScegliAuto



How do you remove the headlight of the Dodge Ram 3500?
RAM 3500 (2009-2019 / DS, DJ, MK 4) In order to replace the front headlight of the Dodge Ram 3500 you must first remove the front grille located between the two headlights. To do this,
How to replace the headlight bulb on the Dodge Ram 3500?
RAM 3500 (2019-2024 / MK 5, DT) In order to replace the headlight bulb of the Dodge Ram 3500 you have to loosen the rivets that are located in the wheel arch corresponding to the bu
How to change the front headlight of the Dodge RAM 2500 - 3500 5.7L.
RAM 3500 (2009-2019 / DS, DJ, MK 4) Today in this video tutorial, we will see how to disassemble and replace the front headlight of the Dodge RAM 3500, as well as the 2500 and 1500 with

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos