Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Front Bumper of the RAM Promaster

Model: RAM Promaster MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Front bumper

See other generations:
Video tutorial

These short and simple steps will show you how to remove and replace the front bumper of the RAM Promaster, as well as the Peugeot Boxer and Fiat Ducato. First, open the hood and start by removing the front headlight assemblies by unscrewing the mounting screws located at the top; then disconnect the wiring harness as shown in the video.

At this point, unscrew the mounting screws of the bumper, along with those located on both sides of the front wheel wells; gently detach the bumper until it is completely removed, and finally reassemble everything!


Updated on 3 October 2026 by ScegliAuto


Related tutorials

How to replace the front bumper grille of the RAM Promaster
How to replace the front bumper grille of the RAM Promaster
RAM Promaster (2014-2022 / MK 1) Following these brief and simple instructions, we will see how to disassemble and replace the front bumper grille of the RAM Promaster, as well as th…
How to install the front fog lights of the RAM Promaster
How to install the front fog lights of the RAM Promaster
RAM Promaster (2014-2022 / MK 1) In this guide, we will see the main instructions that will allow us to install the front fog lights on the RAM Promaster, but also on the Fiat Ducato…
How do you replace the fog light bulb on the RAM Promaster?
How do you replace the fog light bulb on the RAM Promaster?
RAM Promaster (2014-2022 / MK 1) It will be possible to replace the fog light bulb of the RAM Promaster by accessing the underside of the bumper, allowing you to locate the correspon…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos