Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the front fog lights of the RAM Promaster

Model: RAM Promaster MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Fog lights

See other generations:
Video tutorial

In this guide, we will see the main instructions that will allow us to install the front fog lights on the RAM Promaster, but also on the Fiat Ducato. In order to install the fog lights, it is necessary first of all that the front bumper has the predisposition for them; then we proceed to fix the small light on the appropriate housings, fixing them with screws, as shown in the video.

At this point, it will be necessary to pass the wiring to the fuse box, allowing for power supply; a button placed inside will then activate our fog lights.


Posted on 24 October 2025 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on the RAM Promaster?
RAM Promaster (2014-2022 / MK 1) To replace the headlight bulb on the RAM Promaster, open the hood to access the screws that secure the headlight corresponding to the bulb to be repl…
How to Replace the Front Brake Pads on a RAM Promaster?
How to Replace the Front Brake Pads on a RAM Promaster?
RAM Promaster (2014-2022 / MK 1) To replace the front brake pads on a RAM Promaster, lift the vehicle so that the corresponding wheel is not in contact with the ground: this way, you…
Guide to Replacing the Front Bumper of the RAM Promaster
Guide to Replacing the Front Bumper of the RAM Promaster
RAM Promaster (2014-2022 / MK 1) These short and simple steps will show you how to remove and replace the front bumper of the RAM Promaster, as well as the Peugeot Boxer and Fiat Duc…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos