Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a RAM Promaster?

Model: RAM Promaster MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Brake pads

See other generations:
Video tutorial

To replace the front brake pads on a RAM Promaster, lift the vehicle so that the corresponding wheel is not in contact with the ground: this way, you can loosen the bolts that secure the wheel, removing it from its hub and accessing the components at the back.

At this point, you can loosen the mounting screws of the brake caliper, detaching it from the rotor and removing the pads inside; after removal, you can install the new ones, securing the caliper to the rotor and also mounting the corresponding wheel.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

Replace the Front Wiper Blade of the RAM Promaster
Replace the Front Wiper Blade of the RAM Promaster
RAM Promaster (2014-2022 / MK 1) In today's tutorial video, learn how to remove and replace the front wiper blade of the RAM Promaster in simple and quick steps. First, move to the f…
How to Replace the Cabin Filter in the RAM Promaster Van?
How to Replace the Cabin Filter in the RAM Promaster Van?
RAM Promaster (2014-2022 / MK 1) As you can see in this tutorial, replacing the cabin filter in the RAM Promaster van is a very simple and quick operation. First, ensure the engine i…
How to Adjust the Sliding Door on the RAM ProMaster?
How to Adjust the Sliding Door on the RAM ProMaster?
RAM Promaster (2014-2022 / MK 1) To adjust the sliding door on the RAM ProMaster, open the door to access the screws located at the hinges. Once you locate these screws, tighten or l…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos