Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. RAM
  4. :
  5. Promaster
  6. : Brake pads

RAM Promaster - Brake pads

Brake Pads RAM Promaster (2014-2022 / mk 1)

RAM Promaster (2014-2022 / MK 1)
How to Replace the Rear Brake Rotor and Pads on the RAM ProMaster 1500 Mk1

This guide shows how to replace the rear brake pads and rotors on the RAM ProMaster 1500 Mk1. After removing the tire and safely lifting the vehicle, remove …Read all…
Posted on 5 August 2026 by ScegliAuto
RAM Promaster (2014-2022 / MK 1)
How to Replace the Front Brake Pads on a RAM Promaster?

To replace the front brake pads on a RAM Promaster, lift the vehicle so that the corresponding wheel is not in contact with the ground: this way, you can …Read all…
Posted on 17 August 2026 by ScegliAuto

Airbag (1) Shocks (1) Car stereo (1) Battery (3) Glow plugs (1) Key (4) Timing belt (2) Checks and maintenance (4) Dashboard (1) Headlight (1) Tail light (1) Fog lights (2) Air filter (2) Cabin air filter (3) Grille (1) Light bulb (1) Headlight bulb (5) Tail light bulb (1) License plate light (1) Handle (1) Engine oil (3) Clock (1) Front bumper (1) Brake pads (2) Car door (1) Fuse box (28) Side mirror (2) (3) Service warning light (11) Windshield wipers (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos