Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. Promaster
    4. : Cabin air filter

RAM Promaster - Cabin air filter

Cabin Air Filter RAM Promaster (2014-2022 / mk 1)

RAM Promaster (2014-2022 / MK 1)
How to Replace the Cabin Air Filter in the RAM ProMaster Van?
Replacing the cabin air filter in the RAM ProMaster van is a very simple and cost-effective task. First, open the hood, waiting for it to cool down. Then …Read all…
Posted on 3 August 2026 by ScegliAuto
RAM Promaster (2014-2022 / MK 1)
How to Replace the Cabin Filter in the RAM Promaster Van?
As you can see in this tutorial, replacing the cabin filter in the RAM Promaster van is a very simple and quick operation. First, ensure the engine is …Read all…
Posted on 14 July 2026 by ScegliAuto
RAM Promaster (2014-2022 / MK 1)
How to replace the cabin air filter in the RAM Promaster van?
In this tutorial, you will see how to replace the cabin air filter in the RAM Promaster van. For this simple and quick operation, you will only need a Phillips …Read all…
Posted on 4 September 2026 by ScegliAuto
Airbag (1) Shocks (1) Car stereo (1) Battery (3) Glow plugs (1) Key (4) Timing belt (2) Checks and maintenance (4) Dashboard (1) Headlight (1) Tail light (1) Fog lights (2) Air filter (2) Cabin air filter (3) Grille (1) Light bulb (1) Headlight bulb (5) Tail light bulb (1) License plate light (1) Handle (1) Engine oil (3) Clock (1) Front bumper (1) Brake pads (2) Car door (1) Fuse box (28) Side mirror (2) (3) Service warning light (11) Windshield wipers (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos