Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. Promaster
    4. : Air filter

RAM Promaster - Air filter

RAM Promaster (2014-2022 / MK 1)
How to replace the engine air filter on the Ram Promaster
If we need to replace the air filter on this vehicle model, we will find instructions on how to behave and what activities to do in the video tutorial and in …read all…
Posted on 13 June 2022 by ScegliAuto
RAM Promaster (2014-2022 / MK 1)
How do I replace the RAM Promaster air filter?
In order to replace the RAM Promaster air filter, you need to open the hood in order to have access to the components inside the engine compartment. On the …read all…
Posted on 7 May 2024 by ScegliAuto
Airbags (1) Shock absorbers (1) Car stereo (1) Battery (4) Key (3) Timing belt (1) -board computer (1) Checks and maintenance (6) Tail light (1) Air filter (2) Cabin air filter (3) Light bulb (1) Headlight bulb (3) Rear light bulb (1) Handle (1) Engine oil (3) Brake pads (2) Fuse box (17) Outside rearview mirror (2) Windscreen wipers (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos