Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. Promaster
    4. : How to replace the engine air filter on the Ram Promaster

RAM Promaster - Video tutorial

Model: RAM Promaster MK 1 - Years 2014-2022
Part: Air filter
Operation: How to replace the engine air filter on the Ram Promaster

If we need to replace the air filter on this vehicle model, we will find instructions on how to behave and what activities to do in the video tutorial and in the description below. First you need to open the bonnet, and locate the air filter located on the right side of the compartment. Proceed to remove the air duct by loosening the hose clamp. At the base of the air duct there is the cylinder that contains the filter, then proceed to extract the old filter and replace it with the new one, always having first checked the compatibility of the spare part with the type of engine and car. Finally, reassemble the air duct.


Posted on 31 May 2024 by ScegliAuto



How do I replace the RAM Promaster air filter?
RAM Promaster (2014-2022 / MK 1) In order to replace the RAM Promaster air filter, you need to open the hood in order to have access to the components inside the engine compartment.
How to replace the cabin filter in the RAM Promaster van?
RAM Promaster (2014-2022 / MK 1) In this tutorial we can see how to replace the cabin air filter in the RAM Promaster van. For this quick and easy operation we will only need a cross
How to replace the cabin filter in the RAM ProMaster van?
RAM Promaster (2014-2022 / MK 1) Replacing the cabin filter of the RAM ProMaster van is a very simple and affordable operation, let's see how to proceed in this tutorial. First of al

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos