Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the glow plugs in the RAM Promaster?

Model: RAM Promaster MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Glow plugs

See other generations:
Video tutorial

To replace the glow plugs of the RAM Promaster, you will need to open the hood in order to access the components inside the engine compartment: here you will be able to disconnect the connectors that are attached to the glow plugs, located just behind the injectors.

Once freed from the connectors, you can loosen the screws that hold them in place in order to extract them and replace them with new replacement parts.

At this point, you can connect the new glow plugs and verify that they are functioning correctly.


Posted on 14 October 2025 by ScegliAuto


Related tutorials

How to Replace the Windshield Wiper Blades on the Ram Promaster?
How to Replace the Windshield Wiper Blades on the Ram Promaster?
RAM Promaster (2014-2022 / MK 1) To replace the windshield wiper blades on the Ram Promaster, position the blades vertically by lifting the appropriate arm so that they do not touch …
How to Replace the Front Brake Pads on a RAM Promaster?
How to Replace the Front Brake Pads on a RAM Promaster?
RAM Promaster (2014-2022 / MK 1) To replace the front brake pads on a RAM Promaster, lift the vehicle so that the corresponding wheel is not in contact with the ground: this way, you…
How to Replace the Windshield Wipers on the Ram Promaster
How to Replace the Windshield Wipers on the Ram Promaster
RAM Promaster (2014-2022 / MK 1) In this guide, you will see how to remove and replace the front windshield wipers on the Ram Promaster, following the instructions below. First, move…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos