Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. Promaster
    4. : How to replace your Ram Promaster windshield wipers

RAM Promaster - Video tutorial

Model: RAM Promaster MK 1 - Years 2014-2022
Part: Windscreen wipers
Operation: How to replace your Ram Promaster windshield wipers

Let's see in this guide how to disassemble and replace the front wipers of the Ram Promaster, following the instructions below. First of all let's move to the front of our car and start raising the wiper arm; then we go to open the small plastic clip of the blade, rotating it and removing it from the wiper arm, as shown in the video. At this point let's install the new wiper, fixing the clip correctly; we perform the same operation to replace the other front wiper!


Posted on 22 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos