Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

RAM Promaster - Key

RAM Promaster (2023-2024 / MK 2)
How to replace the battery in the RAM ProMaster key.
The procedure needed to replace the button battery located inside the smart key of your RAM ProMaster is very similar to what has already been seen in many …read all…
Posted on 23 June 2023 by ScegliAuto
RAM Promaster (2014-2022 / MK 1)
How to change the key battery on the Ram Promaster.
If we intend to replace the remote key battery on this car, in the following description we have summarized the various steps necessary for the replacement. …read all…
Posted on 20 April 2023 by ScegliAuto
RAM Promaster (2014-2022 / MK 1)
How to replace the key battery on RAM Promaster
In this video we can see how to replace the remote control battery on RAM Promaster. The material needed to replace the battery: A battery mod. CR 2032, a …read all…
Posted on 19 May 2023 by ScegliAuto
Airbags (1) Shock absorbers (1) Car stereo (1) Battery (4) Key (3) Timing belt (1) -board computer (1) Checks and maintenance (6) Tail light (1) Air filter (2) Cabin air filter (3) Light bulb (1) Headlight bulb (3) Rear light bulb (1) Handle (1) Engine oil (3) Brake pads (2) Fuse box (17) Outside rearview mirror (2) Windscreen wipers (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos