Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Key Battery in a Ram ProMaster

Model: RAM Promaster MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Key

See other generations:
Video tutorial

If you intend to replace the remote key battery in this vehicle, the following description summarizes the various steps necessary for the replacement. First, obtain a new CR 2032 battery and a small screwdriver.

Open the key fob, and underneath, you will find a screw that needs to be unscrewed. This allows you to remove the battery housing, which you can extract and replace with the new battery.

Then, reposition the battery holder and screw the screw back in, and you're done.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on RAM Promaster
How to Replace the Key Battery on RAM Promaster
RAM Promaster (2014-2022 / MK 1) In this video, you can see how to replace the remote battery on a RAM Promaster. The materials needed to replace the battery: One CR 2032 battery, a …
How to Replace the Key Fob Battery for the Dodge Ram Promaster
How to Replace the Key Fob Battery for the Dodge Ram Promaster
RAM Promaster (2014-2022 / MK 1) Follow the instructions below to disassemble and replace the battery of the key fob for the Dodge Ram Promaster. First, take your key fob and use a f…
How to Replace the Key Battery in the RAM ProMaster
How to Replace the Key Battery in the RAM ProMaster
RAM Promaster (2023-2026 / MK 2) The procedure to replace the button battery located inside the smart key of your RAM ProMaster is very similar to that seen in many other vehicle mod…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos