Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. Promaster
    4. : How to replace the cabin filter in the RAM Promaster van?

RAM Promaster - Video tutorial

Model: RAM Promaster MK 1 - Years 2014-2022
Part: Cabin air filter
Operation: How to replace the cabin filter in the RAM Promaster van?

As we can see in this tutorial, replacing the cabin filter in the RAM Promaster van is an extremely simple and fast operation. First of all, make sure that the engine is perfectly cold in order to avoid burns, then open the bonnet and, with a short cross-tip screwdriver, unscrew the two screws on the upper side of the air intake. Once this is done, we extract the filter frame and separate the two elements. At this point, we can insert the spare part and recompose everything following the reverse procedure, making sure to reposition the filter in the right direction.


Posted on 25 May 2023 by ScegliAuto



How to replace the cabin filter in the RAM ProMaster van?
RAM Promaster (2014-2022 / MK 1) Replacing the cabin filter of the RAM ProMaster van is a very simple and affordable operation, let's see how to proceed in this tutorial. First of al
How to replace the cabin filter in the RAM Promaster van?
RAM Promaster (2014-2022 / MK 1) In this tutorial we can see how to replace the cabin air filter in the RAM Promaster van. For this quick and easy operation we will only need a cross
How to reset the service in the RAM ProMaster van?
RAM Promaster (2014-2022 / MK 1) In this tutorial we can see how to reset the service in the RAM ProMaster van, an extremely simple and quick operation, to be carried out only once a

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos