Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Sliding Door on the RAM ProMaster?

Model: RAM Promaster MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Car door

See other generations:
Video tutorial

To adjust the sliding door on the RAM ProMaster, open the door to access the screws located at the hinges. Once you locate these screws, tighten or loosen them as needed.

After adjusting all the screws, test the door by opening and closing it to ensure there are no issues. At the end of the adjustment, make sure the door does not have any vibrations.


Posted on 1 February 2026 by ScegliAuto


Related tutorials

How to replace the sliding door handle on the Ram Promaster?
RAM Promaster (2014-2022 / MK 1) To replace the sliding door handle on the Ram Promaster, open the door to access its interior. Here, you will see the handle actuator mechanism, secu…
How to Remove the Interior Partition Panel of the RAM Promaster?
How to Remove the Interior Partition Panel of the RAM Promaster?
RAM Promaster (2014-2022 / MK 1) To remove the interior partition panel of the RAM Promaster, open the sliding side door of the vehicle to access the rear compartment. From there, lo…
How to Change the Engine Oil and Oil Filter of the RAM Promaster
How to Change the Engine Oil and Oil Filter of the RAM Promaster
RAM Promaster (2014-2022 / MK 1) Below is the guide on how to perform routine maintenance by changing the engine oil and oil filter of the RAM Promaster Rapid. First, lift the vehicl…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos