Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the sliding door handle on the Ram Promaster?

Model: RAM Promaster MK 1 - Years 2014-2022
Part: Handle

To replace the sliding door handle on the Ram Promaster, open the door to access its interior. Here, you will see the handle actuator mechanism, secured by screws: by unscrewing these screws, you can remove the actuator from the outer side of the door, disconnecting its connector as well. Once the piece is completely free, you can insert the new one: it should be properly connected and secured with the screws.

Updated on 5 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to install the tablet mount for the RAM Promaster
How to install the tablet mount for the RAM Promaster
RAM Promaster (2014-2022 / MK 1) In this guide, we will see the instructions that will allow us to install the tablet holder on the RAM Promaster, as well as on the Fiat Ducato. Firs…
How to Adjust the Sliding Door on the RAM ProMaster?
How to Adjust the Sliding Door on the RAM ProMaster?
RAM Promaster (2014-2022 / MK 1) To adjust the sliding door on the RAM ProMaster, open the door to access the screws located at the hinges. Once you locate these screws, tighten or l…
How to Replace the Side Mirror on a Ram ProMaster
RAM Promaster (2014-2022 / MK 1) To replace the side mirror on your Ram ProMaster, remove the plastic cover on the door that surrounds the front glass. Under this cover, you will fin…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos