Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Side Door Trim on a RAM Promaster?

Model: RAM Promaster MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the side door trim on a RAM Promaster, use a tool like a screwdriver to pry the trim away from the door: to remove it, all internal rivets must be detached from their housing. Once the rivets are released, the trim will be completely removed, and you can position the new one; it should be properly aligned, and then you can secure it to the door by inserting the internal rivets.

This way, you can open and close the door to verify that it is securely attached.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to replace the sliding door handle on the Ram Promaster?
RAM Promaster (2014-2022 / MK 1) To replace the sliding door handle on the Ram Promaster, open the door to access its interior. Here, you will see the handle actuator mechanism, secu…
How to Adjust the Sliding Door on the RAM ProMaster?
How to Adjust the Sliding Door on the RAM ProMaster?
RAM Promaster (2014-2022 / MK 1) To adjust the sliding door on the RAM ProMaster, open the door to access the screws located at the hinges. Once you locate these screws, tighten or l…
How to Replace the Timing Belt on a RAM Promaster?
How to Replace the Timing Belt on a RAM Promaster?
RAM Promaster (2014-2022 / MK 1) To replace the timing belt on a RAM Promaster, open the hood and lift the vehicle to remove the right front wheel and the corresponding wheel well co…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos