Do it yourself
| ||||
|
RAM 1500 - Video tutorial
Model: RAM 1500
DJ, MK 4, DS
- Years 2009-2019 Today we will see, in this video tutorial, how to remove and replace the external door handle of the RAM 1500, in simple and quick steps. First we open the front door and start removing the door panel; to do this, unscrew the fixing screws that we find on the sides, using a torx screwdriver, as shown in the video. Once the door panel has been removed, disconnect the electric connector from the lock, unscrewing the screws and disconnecting the metal cable; now let's replace the handle and reassemble everything, following the video to the end!
Posted on 21 April 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.029
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |