Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. RAM
  4. :
  5. 1500
  6. : How do I remove the door panel from the Ram 1500?

RAM 1500 - Video tutorial

Model: RAM 1500 DJ, MK 4, DS - Years 2009-2019
Part: Door panel
Operation: How do I remove the door panel from the Ram 1500?

In order to remove the door panel of the Ram 1500 you have to unscrew the fixing bolts which are located in the seat of the internal handle and then those on the left side of the panel. Once these bolts have been removed, it will be possible to go and lift the window control panel to disconnect the connector at the bottom. In this way the old panel can be completely detached from the door, so that it can be replaced with a new spare part: the latter must be suitably fixed using the appropriate bolts.


Posted on 26 September 2022 by ScegliAuto

Other guides that may interest you

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos