|
Do it yourself
| |||
| ||||
How to Replace the Front Turn Signal Bulb on a RAM 1500 [USA]
Model: RAM 1500
DS, MK 4, DJ
- Years 2009-2019
Open the hood, and locate the headlight that needs the bulb replaced. To remove the headlight, use a socket wrench to unscrew the nut located on the side of the headlight near the trim at the bottom. Also, with a ratchet wrench, unscrew the nut at the top corner of the headlight, also near the trim. Additionally, on the front of the fender above the headlight, there is a small access panel that must be opened by removing a retaining clip. Once this panel is open, reach inside to locate a plastic tab that needs to be lifted. At this point, you can pull the headlight out by disengaging it from the mounting pin on the side of the headlight. On the back of the headlight, there is a round cap, and towards the outside of the assembly, locate the turn signal bulb. To disconnect the power connector, lift the red clip, then pull the connector upward and rotate the bulb. Take the new bulb (ensure it is the correct type) and install it onto the socket. Screw the bulb back in and reconnect the connector. Now, reposition the assembly by first inserting the pin on the outer side into its slot and then ensuring the white plastic tab is lifted. Finally, reattach the two screws.
Updated on 13 May 2026 by ScegliAuto
Video tutorial
Related tutorials
RAM 1500
(2019-2026 /
DT, MK 5)
Today, you will learn how to replace the rear headlight bulb on the RAM 1500. Start the replacement by opening the rear of the vehicle and unfastenin…
RAM 1500
(2009-2019 /
DS, MK 4, DJ)
Today, you will learn in this brief and simple guide how to remove and replace the front fog light and its bulb on the RAM 1500, following the instru…
RAM 1500
(2009-2019 /
DS, MK 4, DJ)
To replace the license plate bulb on the Ram 1500, access the underside of the vehicle to disconnect the connector located inside the rear bumper. On…
Other guides you may be interested in
|
How to Replace the Remote Battery for the Volvo XC40?
In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.163
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |