Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the RAM Promaster City cabin filter

Model: RAM Promaster City MK 1 - Years 2015-2022
Part: Cabin air filter

If the cabin air filter inside your RAM Promaster City (year 2015-2022) is now excessively worn and you want to find out how to replace it, then you just have to put the following steps into practice. First, go to the passenger seat and open the glove box. Immediately afterwards, identify the two side hooks present and act on them to disassemble the compartment itself. Once this is complete, locate the filter box in the rear area. Finally, remove the lid and proceed with the replacement of the filter.

Posted on 16 March 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the pollen filter on a Ram Promaster City.
How to replace the pollen filter on a Ram Promaster City.
RAM Promaster City (2015-2022 / MK 1) To replace the cabin filter on a Ram Promaster City, first we need to purchase a new pollen filter; next step is to get on board the vehicle and turn…
Where is the fuse box located in the interior of the RAM Promaster City?
Where is the fuse box located in the interior of the RAM Promaster City?
RAM Promaster City (2015-2022 / MK 1) If you want to find the box containing all the fuses of the cabin of your RAM Promaster City, then all you have to do is pay attention to the steps d…
RAM Promaster City engine oil and oil filter replacement
RAM Promaster City engine oil and oil filter replacement
RAM Promaster City (2015-2022 / MK 1) Let's find out together in this guide the step-by-step instructions to carry out the routine maintenance service, replacing the engine oil and the oi…

Other guides you may be interested in

Reset Tyre Pressure Light Toyota Yaris 2016

Due to advancements in onboard electronics, many vehicles are equipped with various sensors that monitor several operating parameters, including tyre pressure. Even if the pressure is correct, the warning light may sometimes illuminate on the dashboard. First, check with a gauge that the pressure in all 4 tyres matches the manufacturer's specifications. For the 2016 Toyota Yaris, the values are as follows: Front: 2.2 bar for T-type tyres, 2.3 for H-type, 2.4 for W-type. Rear: 2.2 bar for all tyre types. To reset the pressure light, turn on the ignition with the key, locate the reset button under the steering column. Press it for 3 seconds, and the light will flash 3 times before turning off. Remove the key from the ignition and start the vehicle.

Watch the video!


by ScegliAuto

More videos