Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement for RAM Promaster City

Model: RAM Promaster City MK 1 - Years 2015-2022
Part: Engine oil

Follow this step-by-step guide to perform routine maintenance by replacing the engine oil and oil filter on the RAM Promaster City. First, lift the vehicle; then, unscrew the oil drain bolt located on the oil pan, as shown in the video. Now, use the appropriate wrench to unscrew the oil filter, replacing the cartridge with a new one (tightening it gently); finally, unscrew the fill cap and top off with new oil that meets the correct specifications.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on RAM Promaster City.
How to Change the Engine Oil and Oil Filter on RAM Promaster City.
RAM Promaster City (2015-2022 / MK 1) In this video tutorial, see how to change the engine oil and oil filter on a RAM Promaster City by following a few simple steps: First, purchase 0W-2…
How to Replace the Cabin Air Filter in a RAM Promaster City
How to Replace the Cabin Air Filter in a RAM Promaster City
RAM Promaster City (2015-2022 / MK 1) If the cabin air filter in your RAM Promaster City (2015-2022) is excessively worn and you want to know how to replace it, just follow these steps. F…
How to Replace the Cabin Air Filter on Ram Promaster City.
How to Replace the Cabin Air Filter on Ram Promaster City.
RAM Promaster City (2015-2022 / MK 1) To replace the cabin air filter on the Ram Promaster City, first, purchase a new cabin air filter. Next, get inside the vehicle and turn off the engi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos