Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on RAM Promaster City.

Model: RAM Promaster City MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Engine oil

Video tutorial

In this video tutorial, see how to change the engine oil and oil filter on a RAM Promaster City by following a few simple steps: First, purchase 0W-20 engine oil. Next, get inside the vehicle, engage the parking brake, pull the lever to release the hood, and lift the hood, securing it with the prop rod. Unscrew the oil cap. Lift the vehicle with a hydraulic jack and place safety jack stands.

Position a container for used oil under the oil pan and unscrew the oil drain plug, waiting for all the oil to drain into the container.

Meanwhile, unscrew the oil filter and replace it with a new one. Reinstall the oil cap and lower the vehicle; top off the engine oil (check the owner's manual).


Updated on 20 July 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement for RAM Promaster City
Engine Oil and Oil Filter Replacement for RAM Promaster City
RAM Promaster City (2015-2022 / MK 1) Follow this step-by-step guide to perform routine maintenance by replacing the engine oil and oil filter on the RAM Promaster City. First, lift the v…
How to Replace the Cabin Air Filter in a RAM Promaster City
How to Replace the Cabin Air Filter in a RAM Promaster City
RAM Promaster City (2015-2022 / MK 1) If the cabin air filter in your RAM Promaster City (2015-2022) is excessively worn and you want to know how to replace it, just follow these steps. F…
How to Replace the Cabin Air Filter on Ram Promaster City.
How to Replace the Cabin Air Filter on Ram Promaster City.
RAM Promaster City (2015-2022 / MK 1) To replace the cabin air filter on the Ram Promaster City, first, purchase a new cabin air filter. Next, get inside the vehicle and turn off the engi…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos