Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

To reset the TPMS light on a 2012 RAM 1500, follow these steps.

Model: RAM 1500 DS, DJ, MK 4 - Years 2009-2019
Part: Tire pressure warning light

If the TPMS light on the instrument panel of your fourth-generation RAM 1500 (2012 model year) is illuminated and you want to manually reset it, all you have to do is follow these simple steps. First, enter the vehicle and reach the driver's seat. Make sure the instrument panel is off, then press and hold the button located below the speedometer and start the instrument panel. Wait a few seconds, and as soon as the tire pressure warning light reset is complete, release the button, and you're done. If there are any errors, you can repeat the entire procedure without any problems.

Posted on 20 October 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the RAM 1500?
How do you reset the Service light on the RAM 1500?
RAM 1500 (2019-2026 / MK 5, DT) To reset the Service light of the RAM 1500, you will need to turn on the instrument panel by inserting the ignition key into the corresponding slot: …
To reset the oil light on the RAM 1500.
To reset the oil light on the RAM 1500.
RAM 1500 (2019-2026 / MK 5, DT) If you own the brand new RAM 1500 and want to learn how to correctly perform a manual oil indicator reset, all you have to do is carefully read our n…
How to reset the service light on the RAM 1500
How to reset the service light on the RAM 1500
RAM 1500 (2009-2019 / DS, DJ, MK 4) Today's steps will allow us to reset the service light for the regular maintenance of the engine oil change on the RAM 1500. First, we get into the c…

How to Remove the Driver's Side Airbag (Steering Wheel) on a BMW 3 Series

How to remove the driver's side airbag (steering wheel) on a BMW 3 Series? This operation is very simple if you follow the steps. Let's see in this guide how to proceed: insert a medium-length screwdriver into the rear slots on the steering wheel and turn until you release the clips that hold the airbag. Once the airbag is disconnected, disconnect the power connectors and remove it from the steering wheel. For reinstalling the airbag: connect the power connector, then press it onto the steering wheel until the locking clips snap into place inside the steering wheel.

Watch the video!


by ScegliAuto

More videos