Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the Tire Pressure Sensors on a Toyota Prius C

Model: Toyota Prius C Aqua MK 1 - Years 2011-2021
Part:

These quick and simple steps will show you how to program the tire pressure sensors on a Toyota Prius C, and then reset the TPMS light on the dashboard. To program the tire pressure sensors, you need to use specific software connected to the vehicle's OBD port; approach the four tire pressure sensors to program and calibrate the pressures (make sure they are at the operating levels), as shown in the video. At this point, disconnect the tool and verify the reset of the TPMS light!

Posted on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Toyota Prius C Aqua
How to Reset the Service Light on the Toyota Prius C Aqua
Toyota Prius C Aqua (2011-2021 / MK 1) This guide shows how to reset the service light on the Toyota Prius C Aqua Mk1. To perform this operation, turn on the ignition and press the "Trip" …
How to Remove the Air Filter in the Toyota Prius C?
How to Remove the Air Filter in the Toyota Prius C?
Toyota Prius C Aqua (2011-2021 / MK 1) In this tutorial, see how to remove the air filter in the Toyota Prius C, a very simple and quick operation to perform if you want to clean or replac…
Guide to Replacing the Coolant in the Toyota Prius C Aqua
Guide to Replacing the Coolant in the Toyota Prius C Aqua
Toyota Prius C Aqua (2011-2021 / MK 1) In today's tutorial video, you will see the steps to bleed and refill the engine coolant in the Toyota Prius C Aqua. First, open the hood of your car…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos