Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Coolant in the Toyota Prius C Aqua

Model: Toyota Prius C Aqua MK 1 - Years 2011-2021
Part: Antifreeze coolant

In today's tutorial video, you will see the steps to bleed and refill the engine coolant in the Toyota Prius C Aqua. First, open the hood of your car and start by removing the lower coolant hose by disconnecting the metal clamp, allowing the fluid to drain into a container. Then, unscrew the cap of the coolant reservoir and refill it with new antifreeze (the correct type for your radiator). Fill it up to the maximum level mark!

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant in the Toyota Prius C Aqua
How to Replace the Coolant in the Toyota Prius C Aqua
Toyota Prius C Aqua (2011-2021 / MK 1) In today's video, you will see the main instructions for replacing the engine coolant in the Toyota Prius C Aqua. First, lift the vehicle and start u…
How to Replace the Headlight Bulb of the Toyota Prius C Aqua
How to Replace the Headlight Bulb of the Toyota Prius C Aqua
Toyota Prius C Aqua (2011-2021 / MK 1) In today's video tutorial, you will see how to disassemble and replace the headlight bulb of the Toyota Prius C Aqua in simple and quick steps. First…
How to Reset the Service Light on the Toyota Prius C Aqua
How to Reset the Service Light on the Toyota Prius C Aqua
Toyota Prius C Aqua (2011-2021 / MK 1) This guide shows how to reset the service light on the Toyota Prius C Aqua Mk1. To perform this operation, turn on the ignition and press the "Trip" …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos