Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Center Tunnel Cover of the Toyota Prius C Aqua

Model: Toyota Prius C Aqua MK 1 - Years 2011-2021
Part: Center console tunnel

Today, you will learn in this brief and simple guide how to remove and replace the plastic cover of the center tunnel of the Toyota Prius C Aqua. First, get inside the vehicle and start by removing the buttons located under the parking brake lever; use a thin plastic pry tool to disconnect the electrical connectors underneath, as shown in the video. At this point, unscrew the fastening screws on the sides, using the pry tool to remove the entire center tunnel cover; then reassemble everything by applying the reverse procedure!

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Prius C Aqua (2011-2021 / MK 1) Here are the main instructions for removing and replacing the central plastic cover of the dashboard on a Toyota Prius C Aqua. First, get inside the …
Toyota Prius C Aqua (2011-2021 / MK 1) In today's tutorial video, you will see the steps to bleed and refill the engine coolant in the Toyota Prius C Aqua. First, open the hood of your car…
Toyota Prius C Aqua (2011-2021 / MK 1) The cabin air filter should be replaced approximately once a year or every 15,000 miles, whether it is for a Toyota Prius C Aqua or any other car. Th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos