Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Modus
    4. : Control arm

Renault Modus - Control arm

Control Arm Renault Modus (2004-2013 / mk 1)

Renault Modus (2004-2013 / MK 1)
Instructions for Removing Front Driveshaft
To replace the front driveshaft, lift the vehicle (on a ramp or suitable car stands), remove the front wheel, the tie rod end from the steering rack, and the …Read all…
Posted on 20 February 2026 by ScegliAuto
Airbag (4) Shocks (4) Battery (4) Air vents (1) Control arm (1) Spark plugs (1) Glove compartment (4) Snow chains (1) Key (1) Timing belt (5) A/C controls (1) Checks and maintenance (7) Dashboard (2) Brake rotors (1) Headlight (6) Air filter (6) Cabin air filter (9) Diesel fuel filter (2) Light bulb (4) Side marker bulb (1) Headlight bulb (25) Tail light bulb (4) Instrument panel light (1) (1) Handle (2) Engine (1) Starter motor (2) Brake fluid (1) Engine oil (3) Clock (1) Door trim panel (3) Front bumper (2) Brake pads (1) Tires (3) Shift knob (2) Instrument cluster (1) Fuse box (17) Seat (2) Axle shaft (1) Side mirror (7) Warning light – error code (13) Service warning light (28) Manufacturer emblem (1) Fuel cap (1) EGR valve (2) Blower motor (9) Steering wheel (2)

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos