Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Modus
    4. : Engine oil

Renault Modus - Engine oil

Engine Oil Renault Modus (2004-2013 / mk 1)

Renault Modus (2004-2013 / MK 1)
How to Change Oil and Filter on a Modus
Want to change the engine oil of the Renault Modus? Let's also look at replacing the filter. Lift the car on a column lift or jack, unscrew the oil sump plug …Read all…
Posted on 16 May 2026 by ScegliAuto
Renault Modus (2004-2013 / MK 1)
How to Change Oil on a Renault Modus
Do you want to change the engine oil on your Renault Modus? Let's look at the oil and filter change. Lift the bonnet and secure it, then unscrew the oil filler …Read all…
Posted on 3 May 2026 by ScegliAuto
Renault Modus (2004-2013 / MK 1)
Instructions for Replacing Gearbox Oil
Lift the vehicle on suitable car stands to facilitate access to the gearbox. Position a container directly under the gearbox and unscrew the drain plug to …Read all…
Posted on 22 February 2026 by ScegliAuto
Airbag (4) Shocks (4) Battery (4) Air vents (1) Control arm (1) Spark plugs (1) Glove compartment (4) Snow chains (1) Key (1) Timing belt (5) A/C controls (1) Checks and maintenance (7) Dashboard (2) Brake rotors (1) Headlight (6) Air filter (6) Cabin air filter (9) Diesel fuel filter (2) Light bulb (4) Side marker bulb (1) Headlight bulb (25) Tail light bulb (4) Instrument panel light (1) (1) Handle (2) Engine (1) Starter motor (2) Brake fluid (1) Engine oil (3) Clock (1) Door trim panel (3) Front bumper (2) Brake pads (1) Tires (3) Shift knob (2) Instrument cluster (1) Fuse box (17) Seat (2) Axle shaft (1) Side mirror (7) Warning light – error code (13) Service warning light (28) Manufacturer emblem (1) Fuel cap (1) EGR valve (2) Blower motor (9) Steering wheel (2)

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos