Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on the Renault Trafic 3

Model: Renault Trafic MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Headlight bulb

See other generations:
Video tutorial

To replace one of the bulbs in the front headlamp of your Renault Trafic Mk3, follow the steps outlined in this guide. First, park the vehicle on a flat surface and ensure it is completely switched off. Next, lift the bonnet and remove the protective cap located at the rear of the headlamp.

Once done, disconnect the bulb holder and replace the faulty bulb with a new one. Finally, refit the protective cap and the procedure is successfully completed.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

Replacing the Dipped Beam Bulb of the Front Headlamp on the Renault Trafic
Replacing the Dipped Beam Bulb of the Front Headlamp on the Renault Trafic
Renault Trafic (2001-2014 / MK 2) Here are the step-by-step instructions on how to remove and replace the dipped beam bulb of the front headlamp on the Renault Trafic. First, open the…
How to Replace the Dipped Beam Bulb on Renault Trafic
How to Replace the Dipped Beam Bulb on Renault Trafic
Renault Trafic (2001-2014 / MK 2) This brief guide shows how to remove and replace the dipped beam bulb of the front headlight on the Renault Trafic. First, open the bonnet and remove…
How to Replace the Headlight Bulb on a Renault Trafic 3?
How to Replace the Headlight Bulb on a Renault Trafic 3?
Renault Trafic (2014-2026 / MK 3) Fortunately for us, the job we are about to describe here does not require much time or the use of tools; it is simple and within everyone's reach. T…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos