Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the low beam bulb of the front headlight of the Renault Trafic

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Headlight bulb

Let's briefly see the step-by-step instructions on how to disassemble and replace the low beam bulb of the front headlight of the Renault Trafic. First, open the hood and start removing the plastic cover of the front headlight; then disconnect the electrical connector of the bulb and release the metal clip to remove it from the headlight, as shown in the video. At this point, install the new low beam or high beam bulb, with the same fitting; make the connection and check the light operation before reassembling everything!

Posted on 19 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlamp Bulbs on a Renault Trafic
Replacing Front Headlamp Bulbs on a Renault Trafic
Renault Trafic (2001-2014 / MK 2) In this video tutorial, learn how to replace the front headlamp bulb on a Renault Trafic, model produced from 2001 to 2014. First, open the vehicle's…
How to replace the front headlight bulb of the Renault Trafic
Renault Trafic (2001-2014 / MK 2) Removing the headlight bulb of the Renault Trafic is a very simple operation, easily doable on your own and in just a few minutes of your time. The f…
How to replace the rear headlight bulb of the Renault Trafic 3
How to replace the rear headlight bulb of the Renault Trafic 3
Renault Trafic (2014-2026 / MK 3) Today we will explain how to replace the rear headlight bulb on a Renault Trafic 3 vehicle. To replace the bulb, we need to open the trunk and use a …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos