Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlamp Bulbs on a Renault Trafic

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

In this video tutorial, learn how to replace the front headlamp bulb on a Renault Trafic, model produced from 2001 to 2014. First, open the vehicle's bonnet and move to the rear of the headlamp. To remove the dipped beam bulb, disconnect its connector and then remove the rubber cover.

Now, unclip the retaining hook for the bulb; to do this, push the hook and simultaneously turn it to the right, then lower it and remove the old bulb to fit a new one. The bulb required for this vehicle is H4.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

Replacing the Dipped Beam Bulb on a Renault Trafic - Opel Vivaro
Replacing the Dipped Beam Bulb on a Renault Trafic - Opel Vivaro
Renault Trafic (2001-2014 / MK 2) In this video tutorial, you will learn how to disassemble and replace the dipped beam bulb on the front headlight of a Renault Trafic, but also on an…
Replacing the Dipped Beam Bulb of the Front Headlamp on the Renault Trafic
Replacing the Dipped Beam Bulb of the Front Headlamp on the Renault Trafic
Renault Trafic (2001-2014 / MK 2) Here are the step-by-step instructions on how to remove and replace the dipped beam bulb of the front headlamp on the Renault Trafic. First, open the…
How to Replace the Front Headlamp Bulb on the Renault Trafic 3
How to Replace the Front Headlamp Bulb on the Renault Trafic 3
Renault Trafic (2014-2026 / MK 3) To replace one of the bulbs in the front headlamp of your Renault Trafic Mk3, follow the steps outlined in this guide. First, park the vehicle on a f…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos